| 规格/机型 Specification/model | 凸轮 Cam | JSLB-2 | JSLB-4 | JSLB-6 | JSLB-8 | JSLB-A(10) | JSLB-B(12) | JSLB-C(16) |
|---|---|---|---|---|---|---|---|---|
| 编码器 Encoder | JSLBB-2 | JSLBB-4 | JSLBB-6 | JSLBB-8 | JSLBB-A(10) | JSLBB-B(12) | JSLBB-C(16) | |
| 伺服 Servo | JSLBS-2 | JSLBS-4 | JSLBS-6 | JSLBS-8 | JSLBS-A(10) | JSLBS-B(12) | JSLBS-C(16) | |
| 适用压铸机 DCM | 125-400T | 500-800T | 1000-1250T | 1600T | 2000-2250T | 2500T | 2500-3000 Tabove | |
| 给汤量 Ladling Volume (单位：Kg)(Unit:Kg) | 1.0-3.5 | 3.5-6.0 | 8-15 | 12-20 | 15-25 | 20-30 | 25-35 | |
| 给汤精度 Ladling Precision | 最大给汤量的±2% Max. volume±2% | |||||||
| 行程时间 Stroke Time | 炉上-注汤口 (不含伺服) Furnace-Sleeve | 4.0sec | 5.5sec | 6.5sec | 7.5sec | 8sec | 8.5sec | 9.5sec |
| 注汤 Filling | 1.5sec | 2.0sec | 3.5sec | 4.0sec | 4.5sec | 4.5sec | 5sec | |
| 循环时间（不含伺服） Cycle Time(Max)(Servo not availabe) | 15sec | 18sec | 30sec | 35sec | 40sec | 45sec | 50sec | |
| 坩埚内径 Crucible Inner Diameter(Min) | 550mm | 650mm | 800mm | 850mm | 1000mm | 1050mm | 1100mm | |
| 取汤深度 Ladling Stroke(Max) | 340mm | 420mm | 430mm | 500mm | 630mm | 670mm | 820mm | |
| 驱动电机 (不含伺服) | 手臂 Arm | 0.75KW | 1.5KW | 2.2KW | 3.7KW | 3.7KW | ||
| MOTOR (SERVO NOT AVAILABLE) | 汤勺 Cup | 0.2KW | 0.4KW | 750W | ||||
| 主电柜电源 Power Supply | 三相四线AC380V（A、B、C、PE）Three phase with PE（A、B、C、PE） | |||||||
| 操作电源 Control Power Supply | DC24V | |||||||
| 机器重量 Net weight | 270KG | 275KG | 336KG | 510KG | 850KG | 850KG | 900KG | |
| 规格/机型 Specification/model | 伺服 Servo | JSLBS-2 | JSLBS-4 | JSLBS-6 | JSLBS-8 | JSLBS-A(10) | JSLBS-B(12) | JSLBS-C(16) |
|---|---|---|---|---|---|---|---|---|
| 行程时间 Stroke Time | 炉上-注汤口 Furnace Sleeve | 3.0sec | 4.0sec | 5.0sec | 6.0sec | 8.0sec | 8.0sec | 9.0sec |
| 注汤 Filling | 1.5sec | 2.0sec | 3.5sec | 4.0sec | 4.5sec | 4.5sec | 5.0sec | |
| 循环时间 Cycle Time | 13sec | 16sec | 25sec | 30sec | 35sec | 40sec | 345sec | |
| 驱动电机 Servo Motor | 手臂 Arm | 0.85KW | 1.8KW | 2.9KW | 4.4KW | 4.4KW | ||
| 汤勺 Cup | 0.4KW | 0.85KW | 0.85KW | |||||
